Suitable For The Shaft Seal Of Glass Lined Reactor GM2010

Packaged double end structure, arbitrary rotation, strong versatility, mainly suitable for the shaft seal of glass lined reactor, allowing the use of a variety of material selection and end combination to meet the needs of different working conditions.

Type 2110 is equipped with bearings to increase the stability of the mixing shaft and make the seal run smoothly.

product details

Product Introduction

Operating parameter
Pressure: -0.1～1.6MPa
When the pressure in the kettle is greater than or equal to 0.4MPa, a booster auxiliary system must be configured
Temperature：-40～180℃
When the temperature exceeds 180℃, the cooling water tank must be set up, and the height is increased by 80mm

Applicable condition
Strong corrosive medium other than hydrofluoric acid.