Hot Products
China Suppliers Factory Shaft Seal for Glass Lined Reactor GM2010 with Versatile Double End Structure
Product Introduction
⚙️ Operating Parameters
- Pressure: -0.1 ～ 1.6 MPa
- Temperature: -40 ～ 180℃
⚠️
When the pressure in the kettle is greater than or equal to 0.4 MPa, a booster auxiliary system must be configured.
⚠️
When the temperature exceeds 180℃, the cooling water tank must be set up, and the height is increased by 80 mm.
✅ Applicable Condition
🧪
Suitable for strong corrosive media, except hydrofluoric acid.
💬
Frequently Asked Questions
Q
What is the operating pressure range of this equipment?
A
The equipment supports an operating pressure range of -0.1 to 1.6 MPa. For pressures equal to or exceeding 0.4 MPa, a booster auxiliary system must be installed to ensure safe operation.
Q
What is the operating temperature range supported?
A
The equipment operates within a temperature range of -40℃ to 180℃. If the working temperature exceeds 180℃, a cooling water tank must be installed, and the equipment height will need to be increased by 80 mm.
Q
Is a booster auxiliary system always required?
A
No, the booster auxiliary system is only required when the kettle pressure reaches or exceeds 0.4 MPa. For lower pressure applications, it is not mandatory.
Q
What types of corrosive media is this equipment compatible with?
A
The equipment is designed to handle strong corrosive media. However, it is not suitable for use with hydrofluoric acid, which is explicitly excluded from the applicable conditions.
Q
Why is a cooling water tank required when the temperature exceeds 180℃?
A
At temperatures above 180℃, additional thermal management is needed to maintain safe and stable operation. The cooling water tank helps regulate heat, and the 80 mm height increase accommodates the additional installation requirements.
Q
Can the equipment handle both vacuum and positive pressure conditions?
A
Yes. The pressure range starts at -0.1 MPa, which indicates the equipment can operate under slight vacuum conditions, as well as positive pressure up to 1.6 MPa, making it versatile for various process requirements.